Sales Chat - Click Here

Knowledge Base

Search by either entering keywords/KB_ID or by selecting a category.

KB ID: 1153

Configuring Firewall Options on a Buffalo AirStation

Last Updated: 10/15/2024


Note: Firewall options are only available when the AirStation is in router mode. Move the mode switch to "Router" on the AirStation before proceeding.

  1. Connect the AirStation to the PC and power both devices on.
  2. Launch a web browser and enter the AirStation's IP address into the address bar. If you do not know the AirStation's IP address, check the setup card included in your AirStation's package, or use AirStation Configuration Tool to display it.
  3. Log in to Settings. The default username is "admin" and the default password is "password".
    as_firewall_01.png
  4. Click the "Advanced Settings" tile.
    as_firewall_02.png
  5. Click on the "Security" tab on the left, then click on the "Firewall" subtab.
    as_firewall_03.png
  6. Check any firewall options you would like to enable, and then click Apply at the bottom of the screen.
    as_firewall_04.png
  7. After firewall settings are applied, log out of Settings and close the web browser.
X